Equipment type
Nail drill and bit holders: 3/32 holes, tilt and fit lists
What a nail drill and bit holder does, the hole size and tilt makers state, which drills a holder is listed for, and why it is for organization only.
Also listed as nail drill holder, bit holder, handpiece stand
We may earn a commission if you buy through links on this page, at no extra cost to you. Unless a page says otherwise, our picks come from published specifications and listing research, not hands-on testing. As an Amazon Associate I earn from qualifying purchases. How we make money · How we research
Short answer
A drill and bit holder keeps the handpiece and bits in one place on the desk. MelodySusie's 10-hole holder takes 3/32-inch bits, tilts from 13 to 50 degrees and is listed for named MelodySusie drills. It is for organization only, not hygiene.
Key facts
- What it does
- Holds the handpiece and bits on the desk; tilts 13-50 degrees (MelodySusie 10-hole holder)[1]Organization only.
- Bit shank
- 3/32-inch holes (MelodySusie 10-hole holder)[1][2]MelodySusie says all of its bits are 3/32 inch.
- Footprint
- Not confirmedWe verified no dimensions for the holder.
- What no source confirms
- Fit with drills outside the maker's list[1]MelodySusie lists the SC320H, SC320F, SC320D, SC320C, SM200F, MM400C, MM400D, MB450C and MB450E. "Compatible with most nail drills" is the maker's claim.
Watch out for
- Go by the maker's fit list. MelodySusie lists the SC320H, SC320F, SC320D, SC320C, SM200F, MM400C, MM400D, MB450C and MB450E for its 10-hole holder. If your handpiece is not on it, "most nail drills" is only a maker claim.
- The holes are for 3/32-inch bits. Bits labeled 2.35 mm are a different nominal size; no maker statement we found says the two are interchangeable.
- Organization only. A holder keeps bits in order; no source we use makes any cleaning or hygiene claim for one.
What fits
Product details below are the seller's own description unless a source is shown. Pick the variant named for each item.
Drill and bit holder
MelodySusie clip-on nail drill holder, 10 bit holesChoose the holder with 10 bit holes and the acrylic base.
MelodySusie's own page lists the handpieces it fits; check yours is on that list, since the listing title may name more models. On Amazon, check that "Ships from / Sold by" shows Amazon.com or MelodySusie's own store before you buy.
Check price on Amazon Opens amazon.com
Setting up a desk? The workstation hub covers holders, collector placement and posture.
Questions
Will my drill fit the MelodySusie 10-hole holder?
MelodySusie lists its SC320H, SC320F, SC320D, SC320C, SM200F, MM400C, MM400D, MB450C and MB450E drills. For other handpieces, "compatible with most nail drills" is the maker's claim, so compare your handpiece's size with the holder before buying.[1]
What size bits does a drill holder take?
MelodySusie's 10-hole holder takes 3/32-inch bits, and MelodySusie says all of its own bits are 3/32 inch. See do all nail drill bits fit all drills?[1][2]